Waterproof IP65 Outdoor

Every item in this collection is built to handle weather, with IP65 or higher protection named in the listing. Most of it is outdoor lighting: solar spotlights and pathway lights from ALFIOT and T-SUN, solar wall sconces, post lights and flickering torches, motion-sensor floods from LEPOWER and LUTEC, dusk-to-dawn barn lights and hardwired LED security lights from Philips. There are also IP67 rechargeable spotlights, temporary work lights, a Z-Wave outdoor smart plug and a weatherproof electronic padlock.

Understanding the IP code helps you choose. The first digit is dust protection, where 6 means dust-tight; the second is water. A 5 resists water jets from any direction, which covers rain and sprinklers, a 7 survives brief immersion up to 1 metre, and an 8 handles longer submersion. For solar lights, compare the panel size, battery capacity in mAh and whether the panel is separate from the head, which lets you put the panel in sun while the light sits in shade. For security lights, consider lumens, sensor detection angle and range, and whether you want dusk-to-dawn, motion-only or both modes.

Canadian winters are hard on solar lights: short daylight, low sun angles and snow on panels all cut charging, so expect shorter runtime from November to February and brush panels clear after snowfall. Hardwired fixtures should be mounted on a weatherproof box and wired with the power off. Point motion sensors away from roads and trees that move in the wind to reduce false triggers.

Frequently asked questions

What does IP65 mean?

IP65 is an ingress protection rating. The 6 means the product is fully protected against dust, and the 5 means it resists low-pressure water jets from any direction. In practice, an IP65 light handles rain, snow and sprinklers but should not be submerged. For fixtures near ground level where water pools, IP67 or IP68 offers more margin.

Do solar lights work in the winter?

They work, but with less runtime. Fewer daylight hours, low sun and cloud cover mean the battery may only partly charge, and cold reduces battery output. Lights with a separate, angled panel placed in full sun do better than all-in-one units. Clearing snow from the panel after a storm makes a noticeable difference.

Why does my motion sensor light turn on by itself?

PIR sensors react to changes in heat and movement, so passing cars, swaying branches, animals and warm air from vents can trigger them. Lower the sensitivity setting, narrow the detection zone or angle the sensor head downward. Some lights also allow shortening the on-time so false triggers are less noticeable.

Can I replace an outdoor light fixture with a motion-sensor model myself?

If you are comfortable with basic wiring, it is similar to replacing any fixture: turn off the breaker, verify the power is off, connect matching conductors and seal the base against the wall. Use a fixture rated for wet locations and an outdoor-rated junction box. Where provincial rules require a permit or licensed electrician, follow them.