Bathroom Hardware

The accessories that finish a bathroom once the plumbing is in make up this collection. You will find towel bars from about 17 to 36 inches, towel rings, robe and towel hooks, toilet paper holders in wall-mounted, recessed and floor-standing styles (including ones with a phone shelf), multi-piece hardware sets, and drill-less suction-cup hooks and towel bars. Finishes run through matte black, brushed nickel, brushed gold, antique brass and oil-rubbed bronze, from brands including BESy, KOKOSIRI, RUMOSE and FORIOUS.

Most pieces here are made of SUS304 stainless steel, which resists rust in humid rooms better than plated zinc or iron. Next decide on mounting. Screw-mounted hardware is the most secure; adhesive mounts suit rentals and tile you would rather not drill; and suction cups only hold on smooth, non-porous surfaces such as glass, mirrors or glazed tile. Measure the wall space for towel bars, remembering that a 24-inch bar suits one bath towel folded in thirds, while a double bar or 30 to 36-inch length handles two. Buy a matched set when you want the finish to match exactly.

Typical mounting heights are about 120 cm for towel bars and 66 cm from the floor for a toilet paper holder, set roughly 20 to 30 cm in front of the edge of the bowl. When drilling tile, put masking tape over the spot, use a carbide or diamond bit at low speed without hammer mode, and dab silicone into the hole before inserting anchors to keep moisture out of the wall.

Frequently asked questions

Do adhesive bathroom fixtures hold on tile?

On smooth glazed tile, glass or polished stone, quality adhesive mounts hold towels and toilet paper well. They struggle on textured tile, grout lines, painted drywall in steamy rooms and anything recently cleaned with oily products. Clean with rubbing alcohol, press firmly and wait about 24 hours before hanging anything.

What is SUS304 stainless steel?

SUS304 is the Japanese designation for 304 stainless steel, also called 18/8 because it contains about 18 percent chromium and 8 percent nickel. It resists rust and corrosion well in bathroom humidity. It can still show water spots or tea staining near chlorine cleaners, so rinse and dry it occasionally.

How high should I mount a towel bar?

Around 120 cm from the floor is the usual height for a bath towel bar, which lets a folded towel hang without touching the floor or a vanity. Hand towel rings and bars near the sink sit lower, about 50 cm above the counter. In family bathrooms, a second bar set lower is handy for children.

Do suction cup hooks really hold?

They hold well on smooth, non-porous surfaces such as glass shower doors, mirrors and glossy tile, especially newer designs with a twist-lock or vacuum lever. They will not grip textured or porous surfaces. Clean the surface, press out all air, and check them every few weeks, since temperature swings can slowly release the seal.