MasonryDefender Patio Paver Sealer - Low Gloss, Clear, Water-Based, 2.5 Gallon

Refresh and protect outdoor spaces with MasonryDefender Patio Paver Sealer. This clear, water-based acrylic sealer goes on as a milky white emulsion and dries to a subtle, low-gloss finish that preserves color without yellowing. Designed for real-world use, it adds a protective layer against sun fade and weather exposure while maintaining the natural beauty of concrete, brick, and stone surfaces.

Key benefits at a glance

• CLEAR WATERPROOF SEALER: Water-based acrylic formula dries clear for a low-gloss look, helping preserve color without yellowing.
• JOINT SEALING AND SAND LOCK: Hardens and stabilizes joint sand to help deter weed growth and ant colonization in paver joints.
• VERSATILE SURFACE APPLICATION: Suitable for concrete pavers on patios and walkways, including clay brick, cement paver stones, and natural stone.
• EASY APPLICATION AND COVERAGE: Covers 75–150 sq ft per gallon; no mixing required; use a pump-up sprayer and back brush; recoat after 1–2 hours.
• LOW ODOR AND EASY CLEANUP: Subtle odor with simple soap-and-water cleanup, making outdoor projects more comfortable.

Real-world use and best practices

Whether you’re sealing a sun-drenched courtyard, a flagstone walkway, or the edge of a pool deck, this sealer is designed to work with multiple horizontal, above-grade concrete surfaces. The milky appearance during application gives you a tangible guide for even coverage, while the dried finish remains lightweight and natural in appearance. Plan for outdoor conditions by applying in moderate temperatures and avoiding wet or dusty conditions to help ensure an even film.

Two coats can enhance protection and an even appearance across varied textures. If you’re refreshing older pavers, a test area helps verify the level of sheen and color retention you prefer. While the product is designed to be user-friendly, ensure surfaces are clean and dry and follow the recommended recoat interval to optimize results.

Application tips

• Prepare the surface: clean, dry, and free of loose debris before applying.
• Apply with a pump-up sprayer, then back-brush for uniform coverage.
• Allow 1–2 hours between coats and avoid pooling for a consistent finish.
• Enjoy easy cleanup with soap and water after completion.