FLUENTPOWER 1/2HP Submersible Sump Pump — 2500GPH, Auto/Manual, 16.4 ft Cord

Meet the FLUENTPOWER 1/2HP Submersible Sump Pump, a compact, high‑capacity helper for water removal in busy spaces. With a robust 1/2 horsepower motor, this unit can move up to 2500 gallons per hour, supporting fast drainage for basements, pools, ponds, wells, and other water‑filled areas. The 1-1/2 inch discharge port works with standard hoses, and the included adapters simplify installation. Built for submersion, the pump accepts clean or slightly dirty water and can pass solids up to 1/5 inch. A corrosion‑resistant shell and thermal protection add durability for regular use, while a 16.4‑foot power cord and a 26‑foot nylon rope give you flexibility to position the pump where water collects and still reach a power outlet.

Automatic convenience with flexible control

The auto mode starts the pump automatically when water rises to about 4 inches and stops at a 2‑inch level, offering hands‑free operation for typical draining tasks. If you need more manual control or you’re working with lower water levels, switch to manual mode. In manual mode the pump runs continuously until you cut power, which can be useful for stubborn pockets of water or precise removal.

Powerful performance for varied spaces

Designed to handle demanding tasks, this unit can transfer up to 2500 GPH and lift water up to 26 feet. The 1-1/2 inch discharge port supports efficient pumping, while the bottom intake grid allows up to 1/5 inch solids to pass. These capabilities make it suitable for draining pools, ponds, basements, ditches, wells, and hot tubs, offering versatility for seasonal maintenance or emergency draining needs.

Durable design and safety features

Expect long‑lasting use thanks to an upgraded sealing system and a full corrosion‑resistant shell. Thermal protection helps prevent overheating, and the pump can recover after cooling if heat is temporarily generated during a heavy load. These design choices aim to provide reliable service under varied conditions without requiring constant supervision.

Easy setup with ready‑to‑use accessories

Setup is straightforward with three adapters: GHT 3/4" + NPT 1" for standard garden hoses, and a G 1-1/2" discharge port for high‑flow pumping. A check valve helps prevent backflow, while the 16.4‑foot cord and 26‑foot nylon rope enable deep placement and flexible positioning to reach water and power sources.

Key specifications and practical use cases

• Maximum 2500 GPH pumping with a lift capability up to 26 feet
• Discharge port is 1-1/2" to support common hoses
• Passes solids up to 1/5 inch for light sediment handling
• Corrosion‑resistant shell and thermal protection for durability
• 16.4 ft power cord and 26 ft nylon rope for flexible placement
• Adapters included for quick hose connections and a check valve to prevent backflow

In real‑world scenarios, you might encounter a damp basement after heavy rain, a pond needing routine maintenance, or a flooded space in a workshop. The FluentPower pump is designed to handle these moments with a balance of power, portability, and practical features, offering a dependable option for on‑hand water management. Remember, results can vary with conditions, but the unit is built to support a range of draining tasks while remaining mindful of safety and energy use.

Note: This description highlights notable benefits based on the data provided. Individual outcomes depend on application conditions and environment.