Tenee 35oz White Tub & Tile Paint Kit – DIY Refinishing for Bathrooms

Renew, Refinish, Reimagine with the Tenee Tub and Tile Refinishing Kit

Bring renewed life to porcelain, ceramic, or fiberglass surfaces with this 35oz white tub and tile paint kit from Tenee. The low-odor, water-based formula is designed for indoor use and covers roughly 25-30 sq ft per kit, making it suitable for bathrooms, kitchens, and beyond. Whether you’re reviving a tub, refreshing tile, or updating a vanity, this kit offers a like-new appearance without a full remodel.

What’s included and how it helps

• Part A and Part B are mixed thoroughly to activate a durable coating that resists moisture and everyday cleaners.
• Complete tool set includes a paint paddle, silicone caulking tools, masking film, paint roller, brush, masking tape, sandpaper (x4), and gloves, for a streamlined DIY experience.

While no professional skills are required, following the simple steps can help you achieve a smooth, even finish. Prep surfaces, then apply the paint with the roller or brush, allowing the first coat to dry before applying a second coat for even coverage.

Key benefits you may notice

• High adhesion coating aims for a sturdy finish on tubs, tiles, sinks, and related surfaces.
• Moisture- and moisture-resistant properties help extend surface life in damp environments.
• Durable, long-lasting appearance that resists routine cleaning and everyday wear.
• Fast drying—top layer becomes touch-dry in about 24 hours; full cure typically takes about a week.
• Low odor formula makes indoor refinishing more comfortable and less disruptive.
• Versatile usage across porcelain, ceramic, fiberglass, and similar bathroom surfaces.

Tips for best results

• Clean and lightly sand surfaces; remove residue to improve adhesion.
• Mix Part A and Part B completely before application and use approved tools for even coverage.
• Ventilate the area and shield nearby fixtures with masking film and tape.

Project scope and planning

One kit typically covers 25-30 sq ft, making it suitable for a standard bathtub, a vanity backsplash, or a couple of tiles in a shower. Plan for two coats if needed to achieve uniform coverage.