Minoston MP24Z — 800 Series Z-Wave Outdoor Plug with Dual Outlets

Overview

The Minoston MP24Z is built around the robust 800 Series Z-Wave chip, delivering improved signal coverage and faster communication with S2 security. When paired with a compatible hub that supports Long Range, it can extend wireless reach up to 1300 feet, helping you build outdoor automation with confidence.

Designed for exterior environments, this dual-outlet smart plug features an IP65 weatherproof housing, allowing you to connect exterior lights, garden pumps, or seasonal decorations even in damp conditions. For best waterproof performance, hang the unit vertically as noted in the setup guide.

Independent outlets and flexible control

The MP24Z provides two independently controlled outlets, so you can manage two devices separately or together. Rename each outlet, control them via your hub, the companion app, or through voice commands once connected to a compatible assistant. Compared with typical Wi-Fi devices, Z-Wave often offers lower power use and stronger security when paired with a trusted hub.

• Two outlets can be controlled separately
• Lower power usage than common Wi‑Fi devices
• S2 authentication and SmartStart for easier pairing

Smart scheduling and remote operation

Set daily schedules or timers to automate turning devices on or off. The MP24Z supports remote control via a companion app and works with voice control when paired with a compatible ecosystem. This setup enables routine automation without leaving devices on unnecessarily.

• On/off schedules to match daily routines
• Remote control from the app
• Automated timers to prevent accidental energy use

Connectivity, compatibility, and friendly reminders

Works with major Z-Wave hubs such as SmartThings, Vera, Fibaro, Hubitat, and Home Assistant. It can also enable voice control through Alexa or Google Assistant when used with a Z-Wave hub. The device uses the 908.42 MHz band and is FCC and ETL listed. Note that it cannot connect directly to Echo Plus and may not be compatible with some brands.

Important notes: A Z-Wave hub is required for operation, and this outlet is not designed to work as a standalone device. If you’re building outdoor automation with a Z-Wave system, MP24Z can be a useful part of the setup.