Kalawen 4-in-1 Carbon Monoxide & Gas Detector Plug-In – LCD, Dual Alarms, 110–220V

Overview

The Kalawen 4 in 1 plug in detector is a compact safety hub that blends carbon monoxide sensing, combustible gas detection, temperature monitoring, and humidity measurement into one convenient device. It detects a wide range of gases including carbon monoxide, natural gas, propane, methane, LPG, LNG, and common solvents and fuels, helping you stay informed about your indoor environment and react quickly when conditions change.

Smart sensors and alarms

Equipped with dual sensors and dual alarms, the unit triggers audible alerts and flashing indicator lights when thresholds are reached. The alarm is loud and noticeable, and the color indicators help you understand the level at a glance.

• Audible alarm not less than 85 dB
• Flashing light indicators aligned with gas level or CO status

Real time readings on a color display

Live data is presented on a full color LCD in real time. You can monitor carbon monoxide from 0 to 999 ppm with a stated accuracy, track combustible gas levels from 0 to 15 percent LEL, and see current humidity and temperature values. The display also shows a carbon monoxide icon and alarm status for quick awareness.

• CO range 0 999 ppm with ± around 10 percent
• Gas indicator scale levels 1 4 up to 15 percent LEL

Home safety and travel ready

The screen flips 180 degrees for flexible viewing, and the unit fits standard 110 to 220 volt outlets. The low standby power consumption makes it suitable for kitchens, bedrooms, living rooms, basements, offices, and even hotel rooms and RVs during trips.

Practical uses and scenarios

Place it where gas appliances or fuel sources exist to stay aware of changes in the surroundings. It works well on kitchen counters, near furnaces, in basements, or in travel accommodations.

• Kitchen monitoring near stoves and gas ranges
• Bedroom or living area for CO monitoring during heating
• Basement or storage spaces with potential gas buildup
• RV or hotel room safety while traveling

Setup and care

For best results, remove the protective film before first use and plug in. After powering up, allow about 180 seconds for the detector to adapt to its surroundings, and up to 30 minutes for humidity and temperature readings to stabilize. Kalawen supports you with responsive after sales service if needed.