GGR Supplies T.R.U. DC-PEF06P Black Double Coated Window Glazing Tape – Weather Resistant, 1/16 in. x 3/8 in. x 150 ft

Overview

The T.R.U. DC-PEF06P from GGR Supplies is a high-performance double-coated window glazing tape designed to form a reliable inside seal around insulated glass and sash assemblies. Built with a closed-cell cross-linked polyethylene foam core and a solvent-based acrylic adhesive, this tape delivers quick-stick bonding to glass, wood, and aluminum substrates while maintaining a discreet, clean appearance once installed.

The dual-coated foam provides a forgiving, flexible seal that helps reduce air leakage, guarding against wind and moisture intrusion. The blue release liner enables easy, complete liner removal for efficient installation, making it a practical alternative to glazing putty and other messier options.

Why choose T.R.U. DC-PEF06P?

• Weather-resistant performance for outdoor use, with durable protection against dust and moisture.
• Strong adhesion to common window materials (glass, wood, aluminum) and a stable, lasting seal.
• Clean, professional finish thanks to a smooth foam profile and a tidy liner removal process.
• Flexible foam accommodates minor irregularities without creating noticeable ridges or gaps.

• Ideal for glazing work, panel installation, and gap filling around insulated glass units.
• Convenient for mounting emblems, nameplates, plastic strips, and mirrors during or after installation.
• Lightweight yet robust, suitable for both professional and DIY applications.

Specifications at a glance

• Carrier/Backing: Closed-cell cross-linked polyethylene foam
• Adhesive: Solvent-based acrylic
• Thickness: 1/16 in. (approx. 0.0625 in.)
• Width: 3/8 in. (9.5 mm)
• Peel Adhesion: < 140.8 oz/in
• Tensile Strength: Minimum 44 psi
• Elongation (at break): ~15%
• Release Liner: Blue polyolefin film
• Density: 4 lbs/ft³
• Service Temperature: -22°F to 176°F
• Heat Resistance at 176°F: 24+ hours
• Core: 3 in diameter
• Certification: AAMA-tested and approved

How to use

• Ensure surfaces are clean, dry, and free of oils or dust.
• Cut the tape to the desired length with scissors or a knife.
• Apply with steady pressure along the edge or junction where sealing is needed.
• Remove the blue liner gradually to avoid air pockets, then press firmly to seat.
• Trim excess tape for a neat appearance and inspect for gaps.

Note: Sizes are shown in commonly used industry metric equivalents; adjust lengths to match project requirements for a clean, professional finish.