Aqua Tec Aquatec 8800 Booster Pump Kit for RO Systems up to 200 GPD | 8852-2J03-B424

Overview

The Aquatec 8800 Booster Pump Kit is designed to help your reverse osmosis setup perform more consistently by elevating input pressure. Built around the high‑flow 8852-2J03-B424 booster pump, this kit suits standard and manifold RO configurations up to 200 GPD, pairing rugged hardware with practical fittings for straightforward installation.

Why this upgrade makes sense

RO systems benefit from steady water pressure. By lifting typical supply pressure from around 30–40 psi toward 60–80 psi (depending on system capacity), you may experience steadier production and quicker tank replenishment. This can be especially helpful for longer plumbing runs or more complex RO layouts, where pressure drops are more noticeable.

• Heavy-duty steel base plate with a damper helps reduce vibration and adds stability
• PSW-340 pressure switch enables automatic on/off cycling based on output pressure
• Included 110V transformer provides reliable power for continuous operation
• 4 reducer fittings (3/8" to 1/4") ensure flexible plumbing for pump and switch
• Designed for 1/4" or 3/8" OD tubing for broad compatibility

Kit contents and how it helps

• Aquatec 8800 booster pump (model 8852-2J03-B424)
• PSW-340 pressure switch for automatic pump control
• Heavy-duty steel base plate with damper
• 110V transformer
• 4 reducer fittings (3/8" to 1/4")
• Detailed installation instructions

Real‑world use and expectations

For under-sink or countertop RO setups, this kit can help maintain a steady flow to the storage tank. The system senses pressure and adapts in real time: the pump starts when water is drawn and pauses when the tank pressure reaches the target range, then resumes as needed. The result is a more predictable cycle that supports consistent filtration performance without manual intervention.

Notes and compatibility

Made in the USA and wet-tested by the manufacturer, the pump head may contain residual moisture from testing. The kit relies on your existing mechanical auto‑shut‑off valve—an ESO solenoid valve is not included, but a 24VAC solenoid can be added if your setup requires it to avoid valve interference.

Shipping and handling details: during transit, temporary rubber plugs may be installed at the inlet and outlet to prevent leaks and keep dust out. This is normal and part of the kit handling process.