Amana Tool 201005 Carbide Tipped Brad Point Boring Bit, Right-Hand, 5mm Dia x 57mm L

Overview

The Amana Tool 201005 carbide tipped brad point boring bit is designed for woodworkers who value clean starts and precise hole placement. The carbide tip delivers sustained sharpness, while the brad point geometry helps begin holes with minimal wandering. A non-stick PTFE coating is applied to the tool, which can help reduce friction during cutting and support smoother entry into the workpiece.

With a right-hand rotation and a compact 5 mm diameter, this bit is sized for controlled, narrow boring tasks. The combination of cutting height, diameter, and overall length is tuned for repeatability, making it a dependable option for dedicated shop projects and field work alike.

Key specs at a glance

• (B) Cutting height: 27mm
• (D) Diameter: 5mm
• (D) Shank: 10mm
• Overall length (L): 57mm
• Rotation: right hand

Coating and edge behavior

The tool is coated with a PTFE non-stick layer. In cases where carbide edge coatings are present, there is no need to sand away the coating before use. As drilling begins, the coating is cleared from the required cutting edge, helping you maintain focus on the hole’s alignment rather than edge maintenance. This setup may contribute to a smoother entry and more consistent hole quality over multiple passes.

Practical uses and benefits

• Ideal for precise bore starts in woodworking projects where holes must align with accuracy.
• Designed for consistent results in right-hand drilling operations, aiding predictability in manual or powered setups.
• The 5 mm diameter and 57 mm length offer a compact, controlled cutting action suitable for furniture components, casework, and joinery tasks.

Tips for best results

• Set your drill speed to suit the material type and thickness to optimize edge life.
• Ensure the shank is properly seated in the chuck to prevent slip during drilling.
• Use a stable workholding setup to maximize accuracy and minimize tear-out on exit.